Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi aman yang kami sarankan.
The heating of this incubator is optimally tuned for both natural convection and forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.
Working temperature range: min. 10°C above ambient up to +80°C.
Setting accuracy temperature: 0.1°C.
Temperature: 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
Language setting: German, English, Spanish, French, Polish, Czech, Hungarian
ControlCOCKPIT: TwinDISPLAY. adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT- colour displays
Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT: the process time does not start until the set temperature is reached
Calibration: three freely selectable temperature values
adjustable parameters: temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime
Sterilisation: fixed sterilisation programme (4 hours/160°C) for sterilisation of working chamber, not for sterilising the load.
Fan: forced air circulation by quiet air turbine, adjustable in 10 % steps for each segment individually
Fresh air admixture: adjustment of pre-heated fresh air admixture by air flap control in 10 % steps for each segment individually.
Vent: vent connection with restrictor flap.
Temperature control: mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Temperature control: overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY: additionally integrated over- and undertemperature monitor "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature.
Autodiagnostic system: for fault analysis.
Alarm: visual and acoustic.
Untuk informasi lebih lanjut, silahkan hubungi :
Distributor, Agent, Penjualan, Pemasangan dan Training. Jakarta - Indonesia, PT. Anugrah Niaga Mandiri.
Hubungi Kami :
Irfan ( 0816 1337 337 ) , ( 081317103376 ). : Tia ( 081617408900 ).
Alamat : Jl.Radin Inten II No.61 A, Duren Sawit, Jakarta Timur.
Telp : + 62-21 8690 6782, + 62-21 8690 6783.
Fax : + 62-21 8690 6781.
Email : sales@anm.co.id.
Website : www.anm.co.id.
